CAN Input Settings
CAN Protocol
Canbus signal input protocol to read signal from the car.
VW
Covers all VAG car from 1997 up to 2015
VW MQB
All VAG car from the MQB platform from 2015+
Volvo P1
Volvo P2 pre-facelift
250K bus speed
Volvo P2 facelift
500K bus speed
Volvo P3
EMU Black
ECU running at default base ID 0x600 and 1000K bus speed.
Megasquirt
ECU running at default base ID 0x5E8 and 500K bus speed, Dash protocol.
Analog inputs
The controller has a few analog input, whenever available canbus is preffered as input.
Throttle input
Turn ON to use the CAN-BUS throttle signal from the ECU.
Turn Off to use the 5v Analog input on the controller.
Speed input
Turn ON to use the CAN-BUS speed signal from the ABS module.
Turn Off to use the 12v VSS Analog input on the controller.
Brake input
Turn ON to use the CAN-BUS brake signal from the ABS module.
Turn Off to use the 12v Analog input on the controller.
Preffered to set it to analog input its faster and all cars have it connected.
Boost input
Turn ON to use the CAN-BUS boost signal from the ECU.
Turn Off to use the 5v Analog input on the controller.
Parkingbrake input
Turn ON to use the CAN-BUS boost signal from the Cluster.
Turn Off to use the Analog input on the controller.
CAN Speed output
Send out a CAN ABS Speed signal to the car, used in combination with the analog speed input.
Do not activate when the is a CAN ABS sustem installed!
This signal can be used to feed the ECU with a speed signal.
Input Diagnostics
Signal diagnostics screen to check all incomming data on the canbus.
Input Diagnostics
Signal diagnostics screen to check all incomming data on the canbus.